• │COMPRESSOR 460/60/3 116CFM │Cu ┌─Item Text ──────────────────────────────────────────────────────────────────┐ │ COMPRESSOR 460/60/3 116 CFM 150 PSI │ │ │ │ Manufacturer: ATLAS COPCO │ │ Mfr Part No: GA22FF │ │ Size: 116 CFM @ 150 PSI │ │ Add'l Info: ROTARY SCREW, SINGLE STAGE, OIL INJECTED, │. • ® ® ® ® ® Important 1. This Manual applies exclusively to the compressors equipped with the Atlas Copco Elektronikon regulator. This Manual must be used together with the relevant Instruction books for the compressors. • Copyright 1999, Atlas Copco Airpower n.v., Antwerp, Belgium. • User manual Page Page 1 General description.3 10.3 Calling up running hours and service level.14 1.1 Controlling the compressor. • If desired, the function can be activated. Atlas Copco Oil-injected rotary screw compressors GA 30. Maintenance and repair. In multiple compressor systems, manual valves must be installed to isolate. Air compressor equipment, parts, maintenance & repairs. Screw air compressors. Atlas Copco is a world-leading provider of sustainable productivity solutions. ![]() Atlas Copco Gx11 Parts ManualConsult Atlas Copco. When stopping the compressor manually, the regulator will. • User manual Ref. Designation Function Automatic Indicates that the regulator is operation LED automatically controlling the compressor: the compressor is loaded, unloaded, stopped and restarted depending on the air consumption and the limitations programmed in the regulator. Voltage on LED Indicates that the voltage is switched on. • (6) with the same symbol dryer) and the status of the motor can be used to see the previous item. Overload protection. Atlas Copco Ga7ff ManualOn GA55 up to -90C also the actual pressure difference over the oil separator. • User manual Fig. General menu flow 2920 1207 05. • User manual Fig. Menu flow for regulator of GA5/45 2920 1207 05. • User manual Fig. Menu flow for regulator of GA55(W)/75(W)/90C 2920 1207 05. Adobe reader. • If the function keys or arrow keys (5, 6 and 7-Fig. 2.1) are not running and loading hours, on used for 4 minutes, the regulator will automatically return to the GA55 up to GA90C also the main display. Pressure difference over the oil separator. • Indicates that a sensor is out of The display indicates the name of the submenu which can be order: On GA55 up to GA90C: selected (only one name is shown, use the scroll keys (6-Fig. - Temperature sensor at the outlet 2.1) to find the other names). • See section 7.3 to reset the shut-down message. The compressor runs unloaded or loaded. Cg 8520 karaokes manual muscle. This warning indicates that: On water-cooled GA55/75 compressors, the cooling water outlet temperature exceeds the programmed warning level. 2.1) is alight and the main display screen will On Full-feature compressors (compressors with change into a screen similar to the one in Fig. • >, > and > > (reset) on water-cooled GA55/75 also the actual cooling water outlet 3. Switch off the voltage and remedy the trouble. After temperature remedying and when the shut-down condition has disappeared, switch on the voltage and press the key. • The bottom line of the screen shows the available function keys, i.e. > to return to submenu and > to modify the value of the indicated timer; if this should be required, consult Atlas Copco. Example of a measured data display 2920 1207 05.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |